The 8-Bit Digital Video transmission series' FTD100-XXR3 3-channel video fiber receivers feature highperformance laser-based optics for the clearest, most reliable data transmission over one fiber for both single and multi-mode with no video degradation over the entire operating distance (up to 20km).
Supporting 3 independent channels of 8-bit PCM digital video, this plug-and-play product provides instant product compatibility for most major security manufacturers' equipment and reliability in harsh environments, a perfect compliment to any commercial, government or intelligent transportation application. The product features in card module or standalone type.
These units are compatible with the FTD100Micro and FTD100 transmitters.
Video -
- NTSC or PAL video standards supported
- Non-compressed 8-bit digitally encoded video
- 3 independent channel receiver in one module
- No video degradation over the maximum operating distance
Optical -
- Three independent fiber inputs
- High performance laser-based optics
- Multimode or Singlemode
- ST or FC connectors available
Robust Design -
- Plug-and-Play design, no in-field adjustments required
- Hot-swappable design
- Wide operating temperature range of -40ºC to +75ºC
- Designed for use in harsh environments
Warranty -
- Comprehensive Lifetime Warranty
Ordering Information -
Fiber Type | Part Number | Description | Wavelengths (nm) |
Optical Power Budget(dB) | Max. Distance(Km) | No. of slots |
Multi-mode (62.5/125μm) |
FTD100-SMR3 | 3 Independent Optical Channels 8-Bit Digital Video Receiver | 1310 | 23 | 1 | 1 |
Single-mode (9/125μm) |
FTD100-SSR3 | 3 Independent Optical Channels 8-Bit Digital Video Receiver | 1310 | 17 | 20 | 1 |
Video | |
Number of Channels | 3 (from independent Transmitters) |
Format | NTSC/PAL/SECAM |
Input/Output | 1 Volt pk-pk (75 ohms) |
Bandwidth | >=6MHz |
Differential Gain | <1% Typical |
Differential Phase | <1 Degree Typical |
SNR-CCIR weighted | >60dB |
LED | |
Video Signal Indication (Presence) | Green LED lit |
Optical Carrier Detected | Yellow / Active |
Power | Red / On |
Connectors | |
Video Output | BNC |
Optical Input / Output | ST (standard), FC (optional) |
Power (Standalone) | 2-pin screw terminal |
Power(Rack-Mount) | Bus connector |
Electrical and Mechanical | |
Power (Standalone) | 12VDC @ 6W |
Power (Rack Mount) | From FT-C18 Chassis |
Dimensions(WxHxD)(Standalone) | 156 x 30.5 x 223mm(Max) |
Dimensions(WxHxD)(Rack Mount) | 148 x 20.4 x 213mm(Max) |
Shipping Weight(Standalone) | 0.68kg |
Shipping Weight(Rack Mount) | 0.22kg |
Environmental | |
Operating Temp | -40°C to +75°C |
Storage Temp | -40°C to +85°C |
Relative Humidity | 0 to 95% non-condensing |
MTBF | > 100,000 hours |
Options | - ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMT. |
- For Standalone Type, please add “SA”. E.g. SMTSA | |
- Please feel free to consult factory if longer transmission distance is required. | |
Power Adaptor | - Power adaptor included for standalone type only. |
Rack Mount Chassis | - FT-C18 is to be purchased separately. Please refer to accessories section for the details. |