The FTD110DBMicro 8-Bit Digital Video and Data Modules, features high-performance laser-based optics for the clearest, most reliable data transmission over one fiber for both single and multi-mode with no video degradation over the entire operating distance (up to 20km), as well as RS-232/422/485 serial data ports.
This plug-and-play product provides instant product compatibility for most major security manufacturers' equipment and reliability in harsh environments, a perfect compliment to any commercial, government or intelligent transportation application. This small, but mighty, design also comes ready for wall-mounted applications.
These units are compatible with the FTD110DB card module receivers too.
Video -
- NTSC or PAL video standards supported
- Non-compressed 8-bit digitally encoded video
- No video degradation over the maximum operating distance
Data -
- Meets EIA RS-232/422/485 specifications
- Full RS-485 Tri-state support
- Half or full-duplex operation
- Transparent to data encoding
- Data rates from 0 to 256kbps
Optical -
- One fiber design
- High performance laser-based optics
- Multimode or Singlemode
- ST connectors available
Robust Design -
- Plug-and-Play design, no in-field adjustments required
- Microtype for Wall-mount installation
- Wide operating temperature range of -40ºC to +75ºC
- Designed for use in harsh environments
Ordering Information -
| Fiber Type | Part Number | Description | Wavelengths (nm) |
Optical Power Budget(dB) | Max. Distance(Km) |
| Multi-mode (62.5/125μm) |
FTD110DBMicro-SMT | Microtype 1-ch Video Transmitter with 1-ch bidirectional Data Transceiver | 1310 | 1550 | 23 | 2 |
| FTD110DBMicro-SMR | Microtype 1-ch Video Receiver with 1-ch bidirectional Data Transceiver | ||||
| Single-mode (9/125μm) |
FTD110DBMicro-SST | Microtype 1-ch Video Transmitter with 1-ch bidirectional Data Transceiver | 1310 | 1550 | 17 | 20 |
| FTD110DBMicro-SSR | Microtype 1-ch Video Receiver with 1-ch bidirectional Data Transceiver |
| Power Adaptor | - 12VDC Power adaptor is included. |
| Video | |
| Number of Channels | 1 |
| Format | NTSC/PAL/SECAM |
| Input/Output | 1 Volt pk-pk (75 ohms) |
| Bandwidth | >=6MHz |
| Differential Gain | <1% Typical |
| Differential Phase | <1 Degree Typical |
| SNR-CCIR weighted | >60dB |
| Data | |
| Number of Channels(Presence) | 1 |
| Data Direction | Bi-directional |
| Data Interface | RS232, RS422, RS485 2 or 4-wire Tri-state |
| Selection Method | DIP switch-selectable |
| Data Rate | 0~256kbps |
| Data Format | MPD (Manchester, Bi-phase, etc) |
| LED | |
| Video Signal Indication (Presence) | Green LED lit |
| Data In / Out | Green LED lit |
| Optical Carrier Detected | Green / Active |
| Power | Red / On |
| Connectors | |
| Video Input / Output | BNC |
| Optical Input / Output | ST (standard) |
| Data Input / Output | 7-pin screw terminal |
| Power | 2-pin screw terminal |
| Electrical and Mechanical | |
| Power | 7~36VDC @ 2.4W |
| Dimensions | 50 x 30 x 98.5mm |
| Net Weight | 0.1kg |
| Environmental | |
| Operating Temp | -40°C to +75°C |
| Storage Temp | -40°C to +85°C |
| Relative Humidity | 0 to 95% non-condensing |
| MTBF | > 100,000 hours |
