General -
- 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power over Ethernet Output Port (Data + Power)
- Support IEEE802.3at Power over Ethernet (PoE+) Power Sourcing Equipment
- Support 10/100/1000Base-TX
- Support DIN-Rail installation
- Extensive LED indicatiors for PoE diagnostics
- Support AC Power input
- Environmentally hardened -30°C to 70°C (-22°F to 158°F) operating temperature
Ordering Information -
Available Model | Description |
ET-INJ30-AC | Hardened Gigabit 1-port Ethernet Input + 1-port PoE+ Output Injector, AC power input |
Optional Accessories (to be purchased separately) | |
Power Supply | Please refer to the power supply information at the back of the catalogue, our website www.ot-systems.com, or consult OTS sales at sales@ot-systems.com for your power system design properly. |
Package Checklist | |
- Hardened Gigabit PoE Injector | x 1 |
- Wall Mount Plates | x 1 |
- Din Rail Clip | x 1 |
- Quick Installation Guide | x 1 |
Ethernet | |
Standards | IEEE802.3af/at Power of Ethernet |
Processing Type | Forward |
Half-duplex, Full duplex | |
Forward Filter Rate | 1,488,000pps (1000Mbps) |
Cabling | 1000Base-TX: Cat5 or above |
Maximum Distance | Cat5 UTP up to 100m |
Connector | 2 x RJ45 |
Electrical and Mechanical | |
Input Power | 100~240VAC, 50/60Hz |
Power Consumption | 35W Max. |
LED Indicators | |
Power | Power Status |
PoE | PoE Status |
PoE | |
Standard | IEEE802.3at |
Port | RJ45 |
Max. Power | 30W Max (Alternative B Mode) |
Dimensions (W x D x H) | 155 × 120 × 45 mm |
Weight | 1 Kg |
Casing | Thick ET wall-mount Case |
Mounting options | Din Rail |
Environmental | |
Operation Temperature | -30˚C to 70˚C (-22˚F to 158˚F) |
Storage Temperatur | -40˚C to 85˚C (-40˚F to 185˚F) |
Relative Humidity | 0% to 95% non-condensing |
MTBF | > 200,000 hrs |
Regulatory Approvals | |
ISO9001 | |
FCC Part 15 Class A | |
EN55022:2006+A1:2007 Class A | |
Surge Protection: | |
RJ45: 1kV | |
Power: 500V | |
ESD: 4kV / 8kV |