Main Features -
Built-in Unique PoE Management Functions
Intelligent Power Recycling
- The network switch monitors transmission of data packets from powered devices (PDs) in real-time.
- The PoE of the Ethernet port will be reset in order to reboot the PD.
PoE Schedule for Energy Savings
- PoE scheduling can be pre-set on each PoE port to turn on/off PoE and set output power according to the schedule.
PoE Usage Monitoring
- Info such as voltage, current and temperature are available on web management interface.
- Enhances the management efficiently of facilities.
PoE+ Power and Ethernet Data Transmission Distance Extension
- Breaking the 100-meter limit, the PoE extending function can further extend Data and PoE up to 250 meters on UTP cable at 10Mbps for up to 24 PDs with 30W power output.
Redundant Ring
- IES24242MPpH-S supports redundant ring and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.
- The recovery time could be less than 20ms to quickly bring the network back to normal operation.
- The series is also a good solution for 24hr non-stop operation, providing maximum reliability and productivity.
Trap Event Alert via CLI/Web/SNMP
- IES24242MPpH-S provides event alert function, by triggering notification through CLI/Web/SNMP and system log, when there is malfunction in the network.
Dual Power Input for High Reliability
- Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
- Redundant power supply reduces possibility of single-point-of-failure.
Environmentally Hardened Design
- With a compact metal housing with an IP40 rating
- Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations.
- Extended ambient operating temperature range: -40 ̊ C to +75 ̊ C
Other Features -
- L2+ Managed features provide easier manageability, robust security and QoS
- Supports up to 4 × Uplink Combo Gigabit + 24 × 10/100/1000Base-TX PoE
- Support IEEE 802.3af/at (up to 30W)
- IEEE 802.1Q tagged 4K VLANs groups, out of 4094 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- IGMP v1, v2, v3 Snooping
Ordering Information -
Available Model | Description |
IES24242MPpH-S | L2+ Hardened Grade Managed 24-port 10/100/1000Base-TX (PoE+) + 4-port 10/100/1000Base-TX or 100/1000Base-SFP Combo Ethernet Switch with Redundant DC Power Inputs |
Optional Accessories (to be purchased separately) | |
SFP | (S)=SFP Option. Please select your SFP on our SFP Modules page for details. |
Package Checklist | |
- Managed switch | x 1 |
- DB9 female to RJ45 10 pin | x 1 |
- Rack Mount Kits | x 2 |
- RJ-45 Console Cable | x 1 |
Ethernet | |
Standards | IEEE 802.3 10Base-TX |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3ab 1000Base-TX | |
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX | |
IEEE 802.3x for flow control | |
IEEE 802.1D-2004 for Spanning Tree Protocol | |
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) | |
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) | |
IEEE 802.1p for Class of Service | |
IEEE 802.1Q for VLAN Tagging | |
IEEE 802.1X for authentication | |
IEEE 802.3ad for Port Trunk with LACP | |
Processing Type | Store-and-forward (full/half duplex mode) |
Forward Filter Rate | 14,880pps (10Mbps) |
148,800pps (100Mbps) | |
1,488,000pps (1000Mbps) | |
Packet Buffer Memory | 4Mbits |
Max Packet Length | 10K bytes |
Address Table Size | 8K MAC Addresses |
Exchange Property | Delay time: < 7μs; Backplane bandwidth: 56 Gbps; |
IGMP Group | 4096 |
Max. No. of VLAN | 256 |
VLAN ID Range | VID 1 to 4094 |
Interface | |
RJ45 Ports | 24 x 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X |
Combo Ports | 4 x 10/100/1000Base-TX or 4 x 100/1000Base-SFP |
LED Indicators | Power; RUN; LINK/ACT; PoE; ALM; Speed; |
Electrical | |
Input Power | DC9-56VDC (Terminal block, Redundant power); 30W PoE: 48-56V (suggest 52V) |
Consumption (without PoE) | 24W |
PoE Standard | IEEE 802.3af/at, PSE |
PoE Power | Single port Maximum 30W |
PoE Line Sequence | 1/2(+),3/6(-) end-end bridging method |
Total PoE Output | 456W |
Max. Power Consumption | 480W |
Connector | 1 removable 6-contact terminal blocks |
Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm | |
Protection | Overload Current Protection, Reverse Polarity Protection |
Mechanical | |
Dimensions | 440 x 300 x 45 mm |
Weight | 2.6kg |
Casing | Aluminium, IP40 |
Mounting Options | Rack Mount |
Cooling Mode | Natural cooling, no fan design |
Software Features | |
Redundancy Protocols | Support STP/RSTP/MSTP/ERPSv2, Link Aggregation |
Multicast Support | Support IGMP Snooping V1/V2/V3, support GMRP, GVMP,802.1Q |
VLAN | Support IEEE 802.1Q 4K VLAN, support QINQ, Double VLAN |
Time Management | SNTP |
QOS | Flow-based redirection, Flow-based rate limiting, Flow-based packet filtering, 8*Output queues of each port 802.1p/DSCP priority mapping, Diff-Serv QoS, Priority Mark/Remark, Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
ACL | Port-based Issuing ACL, ACL based on port and VLAN, L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc |
PoE Management | Total power limit of PoE power supply |
PoE output power allocation | |
PoE output priority configuration | |
PoE working status | |
Scheduling of PoE operation | |
Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE, LLDP, DHCP Server/Client(IPv4/IPv6), Cloud/MQTT |
Alarm Management | Support 1 way relay alarm output, RMON, TRAP |
Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 |
Support DHCP Snooping, Option 82, 802.1X security access | |
Support user hierarchical management, ACL access control list | |
Support DDOS, port-based MAC filtering / binding, MAC black holes, IP source protection, Port isolation, ARP message speed limit | |
Advance Layer 2+ Features | IPv4/IPv6 Management |
Static Route | |
Environmental | |
Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
Operating Humidity | 5% to 95% (no condensation) |
Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
MTBF | > 100,000 hrs |