The advanced NHD110DRMicro series supports optical transmission of non-compressed HD-SDI or SD-SDI signal format and Reverse Data modules through one multimode or singlemode optical fiber. Capable of transmitting signal up to 20km on singlemode fiber and 500m on multimode fiber, it retains excellent video quality, as well as RS-422/485 serial data ports. This compact yet ruggedized unit is ideal for installation in most camera housings.
Plug-and-Play design ensures ease of installation requiring no electrical or optical adjustments.
Video -
- Non-compressed HD-SDI or SD-SDI signal transmission
- Support SMPTE 259M and 292M standards
- Support data rate up to 1.485Gbps
- Support resolution 720p50/60, 1080i50/60, 1080p25/30
- No video degradation over the maximum operating distance
Data -
- Meets EIA RS-422/485 specifications
- Simplex operation
- Transparent to data encoding
- Data rates 115,200bps maximum
Optical -
- One fiber design
- High performance laser-based optics
- Multimode or Singlemode
- ST connectors available
Robust Design -
- Plug-and-Play design, no in-field adjustments required
- Designed for use in harsh environments
- Microtype fits within most camera housings
- Wide operating temperature range of -40ºC to +75ºC
Local and remote diagnostics -
- Service-friendly LED status indicators on front of the module
Ordering Information -
| Fiber Type | Part Number | Description | Wavelengths (nm) |
Optical Power Budget(dB) | Max. Distance(Km) |
| Multi-mode (62.5/125μm) |
NHD110DRMicro-SMT | Microtype 1-ch HD-SDI Transmitter with 1-ch Data Receiver | 1310｜1550 | 6 | 0.5 |
| NHD110DRMicro-SMR | Microtype 1-ch HD-SDI Receiver with 1-ch Data Transmitter | ||||
| Single-mode (9/125μm) |
NHD110DRMicro-SST | Microtype 1-ch HD-SDI Transmitter with 1-ch Data Receiver | 1310｜1550 | 12 | 20 |
| NHD110DRMicro-SSR | Microtype 1-ch HD-SDI Receiver with 1-ch Data Transmitter |
| Power Adaptor | - Power adaptor is included. |
| Video | |
| Number of Channels | 1 |
| Format | SD-SDI, HD-SDI |
| Data Rate | 1.485Gbps (maximum) |
| Standard | SMPTE 259M, 292M |
| Max Resolution | 720p50/60, 1080i50/60, 1080p25/30 |
| I/O Impedance | 75 Ohm |
| Video Input/Output Level | 800mVp-p±10% |
| Transmission Distance | 100m (Belden 1694A) |
| Jitter | Around 0.2 UI |
| Data | |
| Number of Channels | 1 |
| Data Direction | Reverse only (from RX to TX) |
| Data Interface | RS422 and RS485 (4-wire) |
| Selection Method | DIP switch-selectable |
| Line Termination | DIP switch-selectable |
| Data Rate | 0~115,200bps |
| Data Protocol | Protocol transparency |
| LED | |
| SDI Signal Indication (Presence) | Green/lit |
| Data TX / RX Status | Green/lit |
| Power | Green / On |
| Connectors | |
| SDI Input / Output | BNC |
| Optical Input / Output | ST (standard) |
| Data Input / Output | 7-pin screw terminal |
| Power | 2-pin screw terminal |
| Electrical and Mechanical | |
| Power | 12VDC @250mA |
| Dimensions | 50 x 30 x 98.5mm(Max) |
| Net Weight | ~0.1kg |
| Environmental | |
| Operating Temp | -40°C to +75°C |
| Storage Temp | -40°C to +85°C |
| Relative Humidity | 0 to 95% non-condensing |
| MTBF | > 100,000 hours |
