The IET24242MH-S-RP is designed for high speed data communication for local and remote end connections. The Series is L2+rack-mount managed switches offering twenty-four 10/100/1000Mbps copper twisted-pair ports plus four 100/1000MbpsSFP ports. They support single/multi-mode, 1/2 fiber connections to extend distance up to 20Km for long-distance connections. The switches also support AC power inputs (100–240VAC). Some models of IET24242MH-S-RP support dual AC power inputs and no service interruption in case of apower supply failure. Multiple management interfaces (web, CLI, telnet and SNMP) allow user to configure and monitor the switcheasily. It also supports spanning tree protocol, STP/RSTP/MSTP for network redundancy. With OTS SuperXtra ring,the network recovery time can be reduced to less than 20 ms (in 250 nodes) to minimize the impact to the systems. In addition, the switches support different ring topologies including single/dual ring to ensure excellent reliability and availability of the 24 hours operationsystem. L2 management features include Port/Tag-based VLAN, IGMP snooping, link aggregation, Port-based security and QoS. The IGMP snoopingallows for high bandwidth demand applications such as video surveillance system. The support of Link Aggregation Control Protocolcombines the bandwidth of the multiple ports together to form high speed trunk. The IET24242MH-S-RP offers multiple LayerAccess Control List (ACL) to allow/deny packets based on source/destination MAC addresses, source/destination IP addresses and UDP/TCP ports. Housed in rack-mount fan-less case, the switch canbe installed in the 19” cabinetwith 1U space and well-suited in industrial environment. Model IET24242MH-S-RP switch operates from -40°C to 75°C and enable to work under extreme weather conditions. The Seriesisan ideal, reliable, secure and affordable transmission network solution and suitable for severe andmission-critical environments for industrial applications including surveillance systems, factory automation, intelligent transportation, railway systems, energy and power systems and etc.
General -
- 24 Gigabit Copper ports plus 4 SFP ports 100Base or 1000Base (SX / LX / LH)
- 9K Jumbo frames
- L2 wire-speed switching
- Network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail –over protection (<20ms)
- Support Single & multiple rings
- Advanced VLAN operations: IEEE802.1ad/QinQ VLAN, VLAN tag add/remove/replace
- Private VLAN, port-based/tag-based/protocol-based VLAN
- Multicasting support IGMP v1/v2/v3, proxy & snooping
- Policy-based traffic control engine for actions of Deny, Allow, Queue mapping, rate limit, mirror, or CoS remark on any combination of specific
Layer -2 /Layer- 3/ Layer-4 patterns - QoS (SPQ,WRR, SPQ+ WRR): Hierarchical per-port, per queue shaping & scheduling with bandwidth management
Ordering Information -
Available Model | Description |
IET24242MH-S-RP | L2+ Hardened Grade Managed 24-port 10/100/1000Base-TX + 2-port 100/1000Base-SFP + 2-port 1000Base-SFP Ethernet Switch, Redundant AC inputs |
Optional Accessories (to be purchased separately) | |
SFP | (S)=SFP Option. Please select your SFP on our SFP Modules page at the back of the catalogue or our website www.ot-systems.comfor details. |
Power Supply | Please refer to the power supply information at the back of the catalogue,our website www.ot-systems.com, or consult OTS sales at sales@ot-systems.com for your power system design properly. |
Package Checklist | |
- Managed PoE Ethernet Switch | x 1 |
- Wall Mount Plates | x 2 |
- DIN-Rail Clip | x 1 |
- M3 Screws (for the Wall Mount Plates & DIN Clip) | x 4 |
- DC Power Terminal Block | x 1 |
- SFP Port Dust Covers | x 4 |
- Quick Installation Guide | x 1 |
Ethernet | |
Ethernet Interface | 24 Gigabit Copper ports plus 4 SFP ports 100Base or 1000Base (SX / LX / LH) |
Operating mode | Store and forward, L2 wire-speed/non-blocking switching engine |
MAC addresses | 8K |
Jumbo frames | 9K Bytes |
Copper RJ45 Ports | |
Speed | 10/100/1000 Mbps |
MDI/MDIX Auto-crossover | Support straight or cross wired cables |
Auto-negotiating | 10/100/1000 Mbps speed auto-negotiation; Full and half duplex |
SFP (pluggable) Ports | |
Port types supported | Gigabit fiber multimode, fiber single mode, fiber long-haul single mode 100/1000Base (SX/LX/LH) |
Fiber port connector | LC typically for fiber (depends on module) |
Power | |
Input Power | Redundant Input Terminals |
Input voltage range | 12-58 VDC or 100/240 VAC, 50Hz ~ 60Hz |
Power Consumption | Max. 40W |
Reverse power protection | Yes |
Indicators | |
Power Status indication | Indication of power input status |
Ethernet port indication | Link & Speed |
Mechanical | |
Ingress protection | IP30 |
Dimensions | 440 x 253 x 44 mm |
Net weight | 3.2 Kg |
Unit with packing | 3.5 Kg (include accessories) |
Installation option | 19’’ rack mounting |
Software Features | |
Network Redundancy | |
Fast failover protection rings | Link loss recovery <20ms |
Single & Multiple rings supported | |
Spanning Tree Protocol | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
BPDU forwarding and filtering | |
IEEE 802.3ad Port Trunk with LACP | Static trunk or Dynamic via LACP (Link Aggregation Control Protocol) |
Bridge, Virtual Local Area Networks (VLANs) & Protocols | |
Flow control | IEEE 802.3x (Full Duplex) and Back-Pressure(Half Duplex) |
Max VLANs | 2048 |
VLAN Types | Port-based VLANs, IEEE 802.1Q tag-based VLANs, IEEE 802.1v protocol-based VLANs, IEEE 802.1ad |
Double Tagging (Q in Q) Private VLAN | |
VLAN operations | Attach / Remove / Replacement VLAN tag |
MVR (Multicast VLAN Registration) | Yes |
Multicast protocols | IGMP v1, v2 and v3 with up to 512 multicast groups |
IGMP snooping and querying | |
Immediate leave and leave proxy | |
Traffic Management engine & QoS | |
Policy-based access control engine | Policy/profile-based Access Control List (ACL) |
Multi-layer ACL support; | |
Flexible combination of well-known fixed Layer 2/3/4 fields: - VLAN ID, Source/Destination MAC address, EtherType - Source/Destination IP address, IP protocol number - UDP or TCP, Source/Destination port number of TCP/UDP - DSCP or ToS value |
|
Actions per rule: Deny, Allow, Queue mapping, rate limit, mirror, CoS remark | |
Max number of profiles per switch: 20 | |
Max number of rules per profile: 32 | |
Number of queues per port | 8 |
Scheduling schemes | SPQ, WRR, SPQ + WRR |
Traffic Shaper | Hierarchical per port and per queue shaping & scheduling with bandwidth management |
Traffic Policer | Ingress rate limit in 1K bps granularity |
TrTCM (Two Rate Three Color Marker) policer engine | |
Security | |
Port security | IP and MAC-based Access control; Policy-based Access control |
IEEE 802.1X authentication Network Access Control | |
RADIUS Client for IEEE 802.1X | |
Storm Control | Multicast / Broadcast / Flooding Storm Control on per port and per VLAN basis |
Management | |
User Management interfaces | Cisco-like CLI (command line interface) |
WEB-based Management | |
SNMP v1, v2c, v3 | |
Telnet (5 sessions) | |
Management Security | HTTPs, SSH |
Radius Client for Management (*pending) | |
TACACS+ Client for Management (*pending) | |
Upgrade & Restore | TFTP/FTP for Configuration Import/Export, |
TFTP/FTP for Firmware Upgrade | |
Diagnostic | Syslog |
Policy-based stream mirroring | |
Ethernet Copper connection diagnostic tool | |
NTP/SNTP/td> | Yes |
Environmental | |
Operating Temperature | -40°C to 75°C (-40°F to 167°F) (cold startup at -40°C) |
Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity | 5% to 95% non-condensing |
MTBF | > 100,000 hrs |
Compliance and Regulatory Approvals | |
ISO9001 | Yes |
Certification compliance | CE/FCC |
EMC | FCC Part 15, CISPR 22 (EN55022) Class A, IEC61000-4-2, -3, -4, -5, -6 |
Vibration, shock & freefall | IEC60068-2-6, -27, -32 (pending) |
RoHS and WEEE | RoHS (Pb free) and WEEE compliant |
Related Projects & Links
- IET24242MH-S-RP Datasheet
- 16 Dec 2022
- DOWNLOAD